Rustic wall sconces – To make rustic wall sconces, starting with select the material; Rustic sconces can be made of wood, machined metal or hardened clay or even with paper. The following example will discuss the use of rice paper and hardened clay. Step 2; go to your local hardware storeandbuy a couple of cheap light bulbs. You might want to buy lamps used on a refurbished hardware dealer in your area. You only need the back of the candlestick. Then discard the front glass or cover. You also need a small piece of hardware cloth around 2 feet at 2 feet. Step 3; remove glass or plastic from your lamps.
Place the back cover part (including the wall socket) to the side. Use gloves and use tin clips to cut 2 candlestick covers from hardware cloth. Cut a decorative rice paper to fit the hardware cloth. Glue it into place. Glue on some mash and small twigs that you have gathered from the outside. Attach the old candlestick wall plate to the wall. Make sure the power is turned off and connect the wires. Now place your new cover over the plate and attach through the hardware cloth with the two screws. Step 4; remove glass or plastic from your lamps. Place the back cover part (including the wall socket) to the side. Mix some clay to make your rustic wall sconces cover. Prepare some plastic molds for your clay that forms the clay around them.
12 Photos Gallery of: Make Rustic Wall Sconces
Form the material into the design you want for your rustic wall sconces cover. After the clay is semi-hardened, lay clay over the hardware cloth, just like you did with rice paper above. Punch 2 holes through the side of your plate screw to go through. Allow to dry for several hours. Then attach wall cover and cover, including all wires. Safety tips; Rustic wall sconces either made of wood, wrought iron metal or even hardened clay are charming and fascinating. They can be installed so that they raise the mood of any room, giving it a romantic elegant look. Try installing more rustic wall sconces in the living room for starters and you will be proud of the effect you want to create.