Paver Patio Designs – Creating a paver patio with rectangular pavers in common use is a simple task, plus patios use a square shape that minimizes construction time. However, this approach greatly limits patio design. Although there are curved paving stones, too much design, as you should follow the pre-established curvature of the paving stones when placing them in place. In a completely customizable yard, you will need to modify normal straight pavers, cutting them when needed to create the curve that is needed for your patio design. Use full-sized pavers sticking at an angle to create smooth curves.
Arrange the cobbles in the sand bed to create the curve you need without cutting. For a concave curve, place the cobbles with the points of contact with the outer edge, but with a slight space between the inside the corners of the paver patio designs to form an angular space between them. For a convex curve, use the opposite method, with inner corners touching and outer corners slightly spaced. Install the edge restrictions on the curved edge. Position the fixings below the lower edge of the pavers by following the curve and then fix them to the floor by hammering the steel spikes through the holes of the edge constraints on the floor. Fill gaps between pavers with sand to complete the surface.
12 Photos Gallery of: Curved Paver Patio Designs
Create sharper curves at the edge of the yard by cutting the curve of the pavers prior to placement. Place the complete cobblestones in the sand bed of the patio where you intend to set your curve. Mark the curve on the surface of the paver patio designs with chalk. Remove the paving stones and write the chalk line on the surface paver with the edge of a chisel. Cut the cobbles along the line using a wet saw. Place cut cobbles on the bed of sand and tap in final positions, creating the curve of the yard. Install the edge constraints and then fill the joints between the pavers with sand to complete the curved installation.